;; -*- mode: emacs-lisp -*-
;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.

(defun dotspacemacs/layers ()
  "Configuration Layers declaration."
  (setq-default
   ;; List of additional paths where to look for configuration layers.
   ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
   dotspacemacs-configuration-layer-path '()
   ;; List of configuration layers to load. If it is the symbol `all' instead
   ;; of a list then all discovered layers will be installed.
   dotspacemacs-configuration-layers
   '(
     ;; ----------------------------------------------------------------
     ;; Example of useful layers you may want to use right away.
     ;; Uncomment some layer names and press <SPC f e R> (Vim style) or
     ;; <M-m f e R> (Emacs style) to install them.
     ;; ----------------------------------------------------------------
     ;; auto-completion
     ;; better-defaults
     emacs-lisp
     auctex
     c-c++
     html
     javascript
     smex
     python
     ess
     flycheck
     flyspell
     latex
     auto-completion
     company
     colors
     ;; git
     markdown
     rust
     ;; org
     ;; (shell :variables
     ;;        shell-default-height 30
     ;;        shell-default-position 'bottom)
     ;; syntax-checking
     version-control
     themes-megapack
     )
   ;; List of additional packages that will be installed without being
   ;; wrapped in a layer. If you need some configuration for these
   ;; packages then consider to create a layer, you can also put the
   ;; configuration in `dotspacemacs/config'.
   dotspacemacs-additional-packages '()
   ;; A list of packages and/or extensions that will not be install and loaded.
   dotspacemacs-excluded-packages '()
   ;; If non-nil spacemacs will delete any orphan packages, i.e. packages that
   ;; are declared in a layer which is not a member of
   ;; the list `dotspacemacs-configuration-layers'
   dotspacemacs-delete-orphan-packages t))

(defun dotspacemacs/init ()
  "Initialization function.
This function is called at the very startup of Spacemacs initialization
before layers configuration."
  ;; This setq-default sexp is an exhaustive list of all the supported
  ;; spacemacs settings.
  (setq-default
   ;; Either `vim' or `emacs'. Evil is always enabled but if the variable
   ;; is `emacs' then the `holy-mode' is enabled at startup.
   dotspacemacs-editing-style 'vim
   ;; If non nil output loading progress in `*Messages*' buffer.
   dotspacemacs-verbose-loading nil
   ;; Specify the startup banner. Default value is `official', it displays
   ;; the official spacemacs logo. An integer value is the index of text
   ;; banner, `random' chooses a random text banner in `core/banners'
   ;; directory. A string value must be a path to an image format supported
   ;; by your Emacs build.
   ;; If the value is nil then no banner is displayed.
   dotspacemacs-startup-banner 'official
   ;; List of items to show in the startup buffer. If nil it is disabled.
   ;; Possible values are: `recents' `bookmarks' `projects'."
   dotspacemacs-startup-lists '(recents projects)
   ;; List of themes, the first of the list is loaded when spacemacs starts.
   ;; Press <SPC> T n to cycle to the next theme in the list (works great
   ;; with 2 themes variants, one dark and one light)
   dotspacemacs-themes '(solarized-light
                         solarized-dark)
   ;; If non nil the cursor color matches the state color.
   dotspacemacs-colorize-cursor-according-to-state t
   ;; Default font. `powerline-scale' allows to quickly tweak the mode-line
   ;; size to make separators look not too crappy.
   dotspacemacs-default-font '("Source Code Pro"
                               :size 12
                               :weight normal
                               :width normal
                               :powerline-scale 1.1)
   ;; The leader key
   dotspacemacs-leader-key "SPC"
   ;; The leader key accessible in `emacs state' and `insert state'
   dotspacemacs-emacs-leader-key "M-m"
   ;; Major mode leader key is a shortcut key which is the equivalent of
   ;; pressing `<leader> m`. Set it to `nil` to disable it.
   dotspacemacs-major-mode-leader-key ","
   ;; Major mode leader key accessible in `emacs state' and `insert state'
   dotspacemacs-major-mode-emacs-leader-key "C-M-m"
   ;; The command key used for Evil commands (ex-commands) and
   ;; Emacs commands (M-x).
   ;; By default the command key is `:' so ex-commands are executed like in Vim
   ;; with `:' and Emacs commands are executed with `<leader> :'.
   dotspacemacs-command-key ":"
   ;; Location where to auto-save files. Possible values are `original' to
   ;; auto-save the file in-place, `cache' to auto-save the file to another
   ;; file stored in the cache directory and `nil' to disable auto-saving.
   ;; Default value is `cache'.
   dotspacemacs-auto-save-file-location 'cache
   ;; If non nil then `ido' replaces `helm' for some commands. For now only
   ;; `find-files' (SPC f f) is replaced.
   dotspacemacs-use-ido t 
   ;; If non nil the paste micro-state is enabled. When enabled pressing `p`
   ;; several times cycle between the kill ring content.
   dotspacemacs-enable-paste-micro-state nil
   ;; Guide-key delay in seconds. The Guide-key is the popup buffer listing
   ;; the commands bound to the current keystrokes.
   dotspacemacs-guide-key-delay 0.4
   ;; If non nil a progress bar is displayed when spacemacs is loading. This
   ;; may increase the boot time on some systems and emacs builds, set it to
   ;; nil ;; to boost the loading time.
   dotspacemacs-loading-progress-bar t
   ;; If non nil the frame is fullscreen when Emacs starts up.
   ;; (Emacs 24.4+ only)
   dotspacemacs-fullscreen-at-startup nil
   ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
   ;; Use to disable fullscreen animations in OSX."
   dotspacemacs-fullscreen-use-non-native nil
   ;; If non nil the frame is maximized when Emacs starts up.
   ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
   ;; (Emacs 24.4+ only)
   dotspacemacs-maximized-at-startup nil
   ;; A value from the range (0..100), in increasing opacity, which describes
   ;; the transparency level of a frame when it's active or selected.
   ;; Transparency can be toggled through `toggle-transparency'.
   dotspacemacs-active-transparency 90
   ;; A value from the range (0..100), in increasing opacity, which describes
   ;; the transparency level of a frame when it's inactive or deselected.
   ;; Transparency can be toggled through `toggle-transparency'.
   dotspacemacs-inactive-transparency 90
   ;; If non nil unicode symbols are displayed in the mode line.
   dotspacemacs-mode-line-unicode-symbols t
   ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth
   ;; scrolling overrides the default behavior of Emacs which recenters the
   ;; point when it reaches the top or bottom of the screen.
   dotspacemacs-smooth-scrolling t
   ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
   dotspacemacs-smartparens-strict-mode nil
   ;; Select a scope to highlight delimiters. Possible value is `all',
   ;; `current' or `nil'. Default is `all'
   dotspacemacs-highlight-delimiters 'all
   ;; If non nil advises quit functions to keep server open when quitting.
   dotspacemacs-persistent-server nil
   ;; List of search tool executable names. Spacemacs uses the first installed
   ;; tool of the list. Supported tools are `ag', `pt', `ack' and `grep'.
   dotspacemacs-search-tools '("ag" "pt" "ack" "grep")
   ;; The default package repository used if no explicit repository has been
   ;; specified with an installed package.
   ;; Not used for now.
   dotspacemacs-default-package-repository nil
   )
  ;; User initialization goes here
  (defun highlight-todos ()
    (font-lock-add-keywords nil '(("\\<\\(NOTE\\|TODO\\|HACK\\|BUG\\):" 1 font-lock-warning-face t))))
  (add-hook 'text-mode-hook 'highlight-todos)
  (add-hook 'prog-mode-hook 'highlight-todos)
  (add-hook 'TeX-mode-hook 'highlight-todos)
  (add-hook 'ConTeXt-mode-hook 'highlight-todos)
  (add-hook 'LaTeX-mode-hook 'highlight-todos)
  )

(defun dotspacemacs/config ()
  "Configuration function.
 This function is called at the very end of Spacemacs initialization after
layers configuration."
 (global-linum-mode)  ;; show line numbers by default
)

;; Do not write anything past this comment. This is where Emacs will
;; auto-generate custom variable definitions.
(custom-set-variables
 ;; custom-set-variables was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 '(TeX-command-list
   (quote
    (("TeX" "%(PDF)%(tex) %(file-line-error) %(extraopts) %`%S%(PDFout)%(mode)%' %t" TeX-run-TeX nil
      (plain-tex-mode texinfo-mode ams-tex-mode)
      :help "Run plain TeX")
     ("LaTeX" "%`%l%(mode)%' %t" TeX-run-TeX nil
      (latex-mode doctex-mode)
      :help "Run LaTeX")
     ("Makeinfo" "makeinfo %(extraopts) %t" TeX-run-compile nil
      (texinfo-mode)
      :help "Run Makeinfo with Info output")
     ("Makeinfo HTML" "makeinfo %(extraopts) --html %t" TeX-run-compile nil
      (texinfo-mode)
      :help "Run Makeinfo with HTML output")
     ("AmSTeX" "%(PDF)amstex %(extraopts) %`%S%(PDFout)%(mode)%' %t" TeX-run-TeX nil
      (ams-tex-mode)
      :help "Run AMSTeX")
     ("ConTeXt" "PATH=/home/lidavidm/context/tex/texmf-linux-64/bin:$PATH context --path=/home/lidavidm/config/context %t" TeX-run-TeX nil
      (context-mode)
      :help "Run ConTeXt once")
     ("ConTeXt Full" "texexec %(extraopts) %(execopts)%t" TeX-run-TeX nil
      (context-mode)
      :help "Run ConTeXt until completion")
     ("BibTeX" "bibtex %s" TeX-run-BibTeX nil t :help "Run BibTeX")
     ("Biber" "biber %s" TeX-run-Biber nil t :help "Run Biber")
     ("View" "%V" TeX-run-discard-or-function t t :help "Run Viewer")
     ("Print" "%p" TeX-run-command t t :help "Print the file")
     ("Queue" "%q" TeX-run-background nil t :help "View the printer queue" :visible TeX-queue-command)
     ("File" "%(o?)dvips %d -o %f " TeX-run-command t t :help "Generate PostScript file")
     ("Index" "makeindex %s" TeX-run-command nil t :help "Create index file")
     ("Xindy" "texindy %s" TeX-run-command nil t :help "Run xindy to create index file")
     ("Check" "lacheck %s" TeX-run-compile nil
      (latex-mode)
      :help "Check LaTeX file for correctness")
     ("ChkTeX" "chktex -v6 %s" TeX-run-compile nil
      (latex-mode)
      :help "Check LaTeX file for common mistakes")
     ("Spell" "(TeX-ispell-document \"\")" TeX-run-function nil t :help "Spell-check the document")
     ("Clean" "TeX-clean" TeX-run-function nil t :help "Delete generated intermediate files")
     ("Clean All" "(TeX-clean t)" TeX-run-function nil t :help "Delete generated intermediate and output files")
     ("Other" "" TeX-run-command t t :help "Run an arbitrary command"))))
 '(ahs-case-fold-search nil)
 '(ahs-default-range (quote ahs-range-whole-buffer))
 '(ahs-idle-interval 0.25)
 '(ahs-idle-timer 0 t)
 '(ahs-inhibit-face-list nil)
 '(asm-comment-char 35)
 '(expand-region-contract-fast-key "V")
 '(expand-region-reset-fast-key "r")
 '(ring-bell-function (quote ignore) t))
(custom-set-faces
 ;; custom-set-faces was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 '(default ((t (:background nil))))
 '(company-tooltip-common ((t (:inherit company-tooltip :weight bold :underline nil))))
 '(company-tooltip-common-selection ((t (:inherit company-tooltip-selection :weight bold :underline nil)))))